|
RemoteCam3™
Digital
Camera Integration Kits
Shipping as of
December 2011! |
 |
|
The RemoteCam3™ Camera
extension kits offer a cost and time saving alternative to integrating digital high
definition PTZ cameras into a wide variety of presentation spaces. These
kits deliver:
All this over two standard Cat6 cables up to
120'!
This revolutionary
interface requires no manual cable compensation!
Standard Cat6 is
used, eliminating the need for low-skew or no-skew cable to further help control
cost. Standard
UTP-568A or UTP-568B wiring is used so there's no learning curve.
Traditional UTP cable testers can be used to check all wiring prior to
connecting up the RC3™ electronics.
These kits provides a reliable high quality image and creates an
"invisible" link between the camera and head end.
|
|
RC3 Camera End Front view
 |
RC3 Head End
Rear view
 |
|
At the camera end of the
loop a clean metal enclosure provides safe and secure cable management and clear
differentiation over interfaces. A clearly marked Red location for the
power Cat6 helps installers quickly identify correct wiring ports. On the
camera cable side, latching cables are available with the kits for quick, clean
and very reliable connections.
Mounting holes are
provided on the side of the camera module for flexibility in mounting options.
These 6x32 threaded holes are 1" apart on the centerline of the enclosure.
This allows Integrators complete freedom for their mounting options.
|
|
At the head end, a rack
mountable enclosure provides clean and easy termination points for the UTP
wiring, video, control, camera control loop (VISCA) and power for the local
electronics, camera electronics and the camera.
|
|
RC3 Head End Front view
 |
RC3 Head End
Rear view
|
|
Up to four RC3™ head end modules can be
mounted in a single rack space on our RC2-RK1 rack shelf. This 1RU shelf
provides secure mounting for the RC2 head ends, clean mounting of power supplies
and cable management all built in to the shelf. |
|
Application Overview:
(click drawings for details) |
|
 |
Two provided cables connect the
PrecisionHD camera to the RC3-CE module. |
|
Two Cat6 cables up to 120' long
connect the RC3-CE to the RC3-HE. |
 |
|
 |
Two provided cables now complete
this very simple link. Power up the system and you are on your
way. |
| RemoteCam3
Documentation: (Preliminary) |
|
|
RemoteCam3™ Digital
Overview
RC3 PHD
Options 04.pdf <click to open>
|
| |
|
|
RC3™ Family
Cables
|
|
|
Camera
End Cables
|
|
|
RC3-001™
Short HDMI Cable
HDMI |
Digital video
between a Cisco PrecisionHD camera and a RC3-PHD™ Camera Module |
|
RC3-002™
Short Power & Control Cable
8-Pin RJ45
|
Power & Control
between
a Cisco PrecisionHD camera and a RC3-PHD™ Camera Module |
|
RC3-003™
Short VISCA Loop
6-Pin RJ11
|
VISCA Loop between a
Cisco PrecisionHD camera and a RC3-PHD™ Camera Module |
|
RC3-004™ Short
DVI Cable
Digital video
between a Sony DVI camera and a RC3-PHD™ Camera Module |
Call for availability |
|
RC3-005™ Short
Sony Style Power & Control Cable
12V Camera Power
Control
IR
|
Call for availability |
|
RC3-006™ Short
Sony Style VISCA Loop Cable
VISCA Loop
between a Sony camera and a RC3-PHD™ Camera Module |
Call for
availability |
| Head End Cables |
|
|
RC3-101™ HDMI Cable
HDMI |
Typical 1M high quality
HDMI cable |
|
RC3-103™ Serial Control
Cable
DB9 Serial cable, straight through
wiring to connect RC3™ control port |
|
|
RC3-104™ Camera Control Loop Cable
8-Pin mini DIN (Male
– Black)
Control Out
DB-9 Control (Black)
Control
|
|
|
RemoteCam3™
Cable Documentation: |
| RemoteCam3™ Cable
Guide
RC3 Cable Guide 00.pdf
<click to open> |
| RemoteCam3
Wall Mounts |
|
|
These great
wall mounts are the cleanest wall mount you've ever used! Laser cut to
contour the camera base these mounts have the cameras "floating" in mid air!
Available for the
Cisco
PrecisionHD, Sony EVI-HD3 & Sony EVI-HD7; the RC3 wall
mounts use a standard 2-gang wall box or low voltage ring to secure the camera
mount to the wall.
|
|
|
 |
|
|
RC3-PH1 Mount |
|
For use with or
without the RemoteCam3 interface kits, these mounts provide plenty of
flexibility to work with the cameras and provide a secure mount for long term
reliability.
|
|
(others will be available)
RemoteCam2™,
RemoteCam3™ & DA-Series
Rack Shelf
|
|
Available for the RemoteCam2™ PTZ
camera extension kits is the RC2-RK1™ Rack Shelf. This 1U shelf very cleanly
accepts up to four RC2™ head end modules and provides tie down locations for
cabling and power supplies.
|
 |
 |
|
RC2-RK1™ 1U rack
shelf
|
|
Rack shelf documentation:
RemoteCam2™ Metal
Work
RC2 MetalWork 01.pdf
<click to open>
|
|
Return to Top
|