Software Utilities & Firmware Updates
AVTPanel™ software has been developed to control and demonstrate key products in the SCT family. The AVTPanel™ software is a 32-bit application so Microsoft's' Windows95, Windows98, Windows ME, Windows 2000 or Windows XP are required.
This utility is not intended for older Windows NT.
Download and Installation Instructions:
Once you have downloaded the AVTPanel™ software to your computers hard disk, from Windows Explorer or Run, extract AVTPanel™. The installation process will prompt you to through.
You may change the default path, this is only a recommendation. For those of you tired of installing demo software that trashes other programs, AVTPanel™ is a single executable (500k), no DLL's thrashing about.
AVT365.ZIP
(359k) 11/03/2005
AVTPanel™ v3.65 replaces all previous versions. If you run into any inconsistencies please let us know.
AVTPanel™ now allows manual selection of COMM port so you don't get caught up on IR ports or other devices during auto negotiation.
SCTUtil32™ is a 32-bit utility that is used as a terminal program and for updating firmware in Series II ASP-xxx units. This program should be used in all Win XP and above environments. Download the current firmware below.
SCTUtil32_v002_full.zip
(3,220k)
05/02/2006
Series-II ASP-Family Firmware
Please download the following ZIP file for the latest version of Series II ASP-Family firmware. This firmware can be used to upgrade all Series II ASP's to the most current version. Unzip the attached file to a directory you'll be able to navigate to in SCTUtil32™ and upgrade your units.
ASP8x8S2_316.zip
(78k)
05/02/2006
Series II AVT Teleconferencing Products:
Series II AVT-24™ & AVT-44™
The Series II AVT-24™ and AVT-44™ have been very successful products for SCT. Both the Series II AVT-24™ and AVT-44™ share the same firmware. An updated NoTrain firmware version for these units will be posted soon. SCT is dedicated to continue to develop more robust modules for the electro-acoustic products we offer.
To verify if your Series II AVT can be serial port software upgraded or require an EPROM change, please check with SCT.